M-SAND

Manufacturing of sand involves three stages, crushing of stones into aggregates by VSI. This is fed into a rotopactor to crush aggregate into sand of required grain sizes. Then screening is done to eliminate the dust particles.

Washing of the sand eliminates even the very fine dust particles present within it.

The end product will satisfy all the requirements of IS: 383 Zone II and can be used in concrete and for construction.

M-Sand Rough

Manufacturing of sand involves three stages, crushing of stones into aggregates by VSI. This is fed into a rotopactor to crush aggregate into sand of required grain sizes. Then screening is done to eliminate the dust particles. Washing of the sand eliminates even the very fine dust particles present within it. The end product will satisfy all the requirements of IS: 383 Zone II and can be used in concrete and for construction.

M-Sand Plastering

P Sand is used for wall plastering and brickwork purposes. The granule thickness is 150 microns to 2.38 mm and is ideal for plastering purposes.

Plastering M Sand should be mixed with cement in the ratio 1:14 for internal works in the ratio and 1:16 for external works. Our product will meet out all the requirements of IS: 1542 (Zone IV).